DAELIM E-FIVE Owner's Manual download pdf (Page 41)

If electrode is stained or clearance is not

right, satisfactory spark is not produced.

Clean and make adjustment.

① Loosen the special screw and remove

the plug maintenance cover.

② Remove the spark plug cap.

③ Clean around the plug.

④ Using a plug wrench, remove the plug.

⑤ Clean plug with plug cleaner.

⑥ Check electrode for wear and corro-

sion.

⑦

Check the plug gap using a feeler gauge.

PLUG GAP : 0.6~0.7mm

⑧Tighten with hands until the plug

washer touches cylinder head.

STANDARD PLUG: B8HSA

⑨ If new plug is installed, turn 1/2 and

tighten using a plug wrench.

If plug is reused, turn 1/3~1/4 and

tighten.

⑩ Install in the reverse order of removal.

SPARK PLUG

CAUTION

●If plug of different maker or different

heat value is used, it causes

unsatisfactory engine starting,

inadequate engine revolution and

output deterioration.

●The spark plug must be securely

tightened. An improperly tightened

plug can become very hot and

possibly damage the engine.

PLUG GAP

PLUG MAINTENANCE COVER

SPARK PLUG CAP

SPARK PLUG

SCREW

**E-5 OWNERS(1~47) 02.11.5 4:3 PM 페이지40

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 64 65

No comments

DAELIM E-FIVE Owner's Manual Page 41