DAELIM S2 250 - Specifications download pdf (Page 46)

Connect the white colored coupler only.

<REMOVAL>

① Loosen the 6 washer screws and 1

flange bolt, and remove the tube clip

and air cleaner case cover.

② Inspect the air cleaner element.

③ If the air cleaner element is

excessively dirt or damaged, replace it

with a new one.

45

AIR CLEANER ELEMENT INSPECTION

COUPLER CONNECTION

CAUTION

●If the air cleaner element is

inadequately assembled, dust and

other waste materials can directly

enter the engine. This results in

increased cylinder wear and reduced

power, and reduced durability of the

engine.

●When washing the vehicle, be careful

not to allow water to get into the air

cleaner. Difficulties in starting the

engine may result if this happens.

●If the engine start is failed during

rain or after driving across water

pool, check to see if the water is

infiltrated in the air cleaner and clean

it.

●Do not drive in the flooded area. If

the water enters the air cleaner or

engine, the vehicle may be subjected

to the rear-end collision due to the

power failure.

AIR CLEANER ELEMENT

AIR CLEANER CASEAIR CLEANER COVER

NOTE

●If the black coupler is connected by

mistake the fuses are cutoff.

DOMESTIC

USE ONLY

/BLACK

EXPORT

USE ONLY

/WHITE

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 65 66

Comments to this Manuals

No comments